So you want to make a mini pallet? Excellent. Here are the drawings I used to make in this video.
In addition to raw materials you will also need the following hardware, but of course modify to suit your build.
(6) Dowel Pins, 1″LG x 0.3125 OD (-0.0001 to -0.0003)
(4) SHCS, 5/16-18 x 0.75″ LG (for sub base mounting)
(3) FHCS, 3/8-16 x 2″ LG (for pivot bar mounting)
(2) SHCS, 1/2-13 x 1.5″ LG (for tee-slot mounting)
Happy Machining!
After your purchase, you will receive an email confirmation of the order with a link to download the drawing PDF. If you have any questions just give me a shout at contact@inheritancemachining.com.
Note: This purchase is for a technical drawing only. This is not for a physical product.
So you want to make a mini pallet? Excellent. Here are the drawings I used to make in this video.
In addition to raw materials you will also need the following hardware, but of course modify to suit your build.
(6) Dowel Pins, 1″LG x 0.3125 OD (-0.0001 to -0.0003)
(4) SHCS, 5/16-18 x 0.75″ LG (for sub base mounting)
(3) FHCS, 3/8-16 x 2″ LG (for pivot bar mounting)
(2) SHCS, 1/2-13 x 1.5″ LG (for tee-slot mounting)
Happy Machining!
After your purchase, you will receive an email confirmation of the order with a link to download the drawing PDF. If you have any questions just give me a shout at contact@inheritancemachining.com.
Note: This purchase is for a technical drawing only. This is not for a physical product.
