Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
So you want to make a lathe tool height indicator stand? Excellent. Here are the drawings I used to make the project in this video.
These are the engineering drawings I put together for the lathe tool height indicator stand.
The drawings reflect the design as built with the exception of the change I made to the rounded ends on the base. The version as built has these at a radius 1.25″.
In addition to raw materials you will also need:
(5) SHCS, 10-32 X 3/4″ LG, Black Oxide (McMaster-Carr 91251a345)
After your purchase, you will receive an email confirmation of the order with a link to download the drawing PDF. If you have any questions just give me a shout at contact@inheritancemachining.com.
Note: This purchase is for a digital technical drawing only. This is not for a physical product.
So you want to make a lathe tool height indicator stand? Excellent. Here are the drawings I used to make the project in this video.
These are the engineering drawings I put together for the lathe tool height indicator stand.
The drawings reflect the design as built with the exception of the change I made to the rounded ends on the base. The version as built has these at a radius 1.25″.
In addition to raw materials you will also need:
(5) SHCS, 10-32 X 3/4″ LG, Black Oxide (McMaster-Carr 91251a345)
After your purchase, you will receive an email confirmation of the order with a link to download the drawing PDF. If you have any questions just give me a shout at contact@inheritancemachining.com.
Note: This purchase is for a digital technical drawing only. This is not for a physical product.